PP Carrier Electret Masterbatch Pellet

                                             Electret Masterbatch PP carrier for BFE99 meltblown nonwoven fabric of face mask           

A typical medical Face Mask contains three layers of nonwoven cloth, Spunbonded-Meltblown-Spunbonded nonwoven fabrics, among which the middle lining of meltblown fabric plays a crucial role in filtering viruses and bacteria. The mechanism of meltblown nonwoven fabric is to filter more than 95% of the particles in air which contains viruses and bacteria through electrostatic absorption, therefore the meltblown fabric needs to get electret treatment during the process to make sure it contains sufficient electret charges which can be kept as long as possible, and a suitable electret masterbatch is critical for this purpose.

Inorganic type Electret Masterbatch IB-10 has been widely used and accepted by customers in the industry.  Adding IB-108 with mixing ratio of 1~3% to the bulk material of PP UHF1500 which is also developed and produced by us, the meltblown nonwoven fabric comes out with Bacteria Filtration Efficiency ( BFE) at 95% and as high as up to 99.99%, the higher mixing ratio, the higher BFE, and this BFE is almost permanent, won't fade out as time passes.

Below is a Technical Data Sheet of this product, for your reference,

All the other technical documents, including MSDS, Rohs and REACH and so on, are availabel and will be provided upon request.